IMPEDIO

Technical Features

STANGL Wet Process Tools Ensure Economic and Reliable Production
  • Low cost of ownership
  • Low process temperatures
  • High availability (uptime > 98 %)
  • Lowest chemical consumption possible
  • Single-side coating of CdS or alt. buffer layers
  • Both side etching with spray or dipping processes
  • Both side cleaning with spray process
  • Reproducible process results
  • Automatic dosage and mixing systems
  • Optimized DI water consumption
  • Uniform spot-free foil drying (dry-in/dry-out)
  • Waste and exhaust management system
  • Networked communication supported
  • Compliant with European/U.S. safety regulation


Main Features IMPEDIO
Width from 100 mm to 1000 mm
Other sizes on request
Dimension L/W/H
Length 7800 mm
Width 3300 mm (according to width of foil)
Height 3100 mm
Substrate Material Polyimid foil, metal foil
Utilities N2, CDA, DI Water, THS, NH3,
Cd Salt, Zn Salt, Waste Drains;
Electrical power 400 VAC 3/PE
Typical Cycle Time Up to 10 - 14 min/cycle
(depending on process)